Free Australia-Wide Shipping for orders over $200
A powerful and convenient tank storage has never been this simple and easy! Use it on your boat or if you decide to go diving on your friend's boat just take it with you.
The SeaSucker 2 Tank Rack is a truly removable Dive Tank Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the two integrated 152 mm SeaSucker Vacuum Mounts. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Dive Tank Holder. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mounts when not in use press the included Protective Covers over the Vacuum Cups and you're done.
Two 152 mm Vacuum Mounts pre-installed on the 508 mm aluminium track using marine grade stainless steel hardware provides the muscle to keep your tanks in place.
Please Note: This product uses the Roll Control Tank Holders and can be optioned with the Fold Down Tank Holders or the Flexible Tank Straps as shown below
"Roll Control - Fold Down Tank Holder" or the "Roll Control - Flexible Tank Strap"
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
| Maximum Pull Rating: | 90 kg |
| Load Carrying Capacity: | 31.75 kg |
| Vacuum Mount Diameter: | 152 mm |
| Vacuum Mount Height when mounted: | 46 mm |
| Vacuum Mount Height at rest: | 56 mm |
| Housing Top Diameter: | 60 mm |
| Housing Height Only: | 33 mm |
| Housing Top Slot Width: | 7 mm |
| Housing Top Slot Length: | 14 mm |
| Housing Centre Thread: | ¼-20 |
| Overall Width: | 502 mm |
| Overall Height: | 152 mm |
| Overall Depth: | 254 mm |
| Total Number of teeth on each Tank Holder half | 16 |
| Minimum internal diameter (all 16 teeth interlocked) | 170 mm |
| External width (all 16 teeth interlocked) | 230 mm |
| Minimum internal diameter (8 teeth interlocked) | 220 mm |
| External width (8 teeth interlocked) | 280 mm |
| Minimum internal diameter (4 teeth interlocked) | 250 mm |
| External width (4 teeth interlocked) | 310 mm |
Conner steals the show with showing how seasuckers work.
SeaSucker recommends occasional cleaning and maintenance to ke...
http://www.seasucker.com SeaSuckers are powerful vacuum-cup mo...
SeaSucker
SeaSucker Single Tank Rack At the hear of the SeaSucker Single Tank Rack is the SeaSucker 152 mm Whit
SeaSucker
SeaSucker 2 Cup Holder Vertical Mount The SeaSucker low-profile 2 Cup Holder will attach to virtually any vertical su
SeaSucker
SeaSucker Pro Series 2-Rod Holder with one 152 mm Vacuum Mount This is SeaSucker’s beefed up 2-Rod Holder; its
Lee’s Tackle
Lee's Tackle Silver Aluminium 50 mm (2") Clamp-On Boat Rod Holder Vertical Mount The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for
