null
Shop
Brands
SeaSucker Aluminium Rod Holder. The removable rod holder capable of trolling medium to heavy game rods

SeaSucker

Aluminium Rod Holder

Add to Compare
SKU:
MF5031
Condition:
New
Availability:
IN STOCK - Same business day shipping if order is placed before 3pm

SeaSucker Aluminium Rod Holder

Need extra rod storage space or a boat rod holder capable of taking the pressure of a fish strike? Crafted from polished aluminium with a mirror finish it looks like the standard boat gear found in most high end boats. It's primary purpose is both trolling and rod transportation; capable of trolling your medium to heavy game rods / reels.

Bolted to the back is one 152 mm SeaSucker Vacuum Mount packing 90 kg of holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 152 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.

Supporting the 152 mm SeaSucker Vacuum Mount are two integrated support legs with rubber caps. This gives this aluminium boat rod holder additional torque resistance and stability.

The rod holders are fitted with moulded PVC inserts and have a welded stainless steel pin at the bottom for slotted rod butts. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!

Rod holder has a 45 mm internal diameter; has a plastic insert; is 254 mm deep and pinned at the bottom for slotted rod butts. Rod Holder Dimensions: 316 mm x 152 mm.

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 

Product Features & Benefits

  • You will save on the cost of having to fill in holes ever time, this can get very expensive!
  • You will save money by not having to buy the same equipment for your next boat.
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
  • The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
  • If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
  • It's the only boat rod holder on the market that can be used in almost any boat.
  • If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you. 

 

WHAT'S IN THE BOX? 
  • SeaSucker Aluminium Rod Holder with one 152 mm Vacuum Mount Kit includes
    • 1 x Aluminium Rod Holder
    • 1 x 152 mm SeaSucker White Vacuum Mount (pre installed)
    • 1 x 152 mm SeaSucker White Protective Cover
    • SeaSucker Vacuum Mount User Guide 
    • This kit arrives pre-assembled  

 

Specifications

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.  

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Aluminium Rod Holder Specifications
Rod Holder Internal Diameter:  44 mm
Rod Holder Internal Depth: 304 mm
Aluminium Track Length: 406 mm

 

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Free Shipping Australia-Wide for orders $200+

Total:
¥0.00
view cart