SeaSucker
1-Cup Holder - Vertical Mount
SeaSucker 1-Cup Holder Vertical Mount This is your personal cup holder - never again will your drink spill over. It d
Free Australia-Wide Shipping for orders over $200
The SeaSucker Fisherman's Cup Holder is somewhat special; it has features like no other Boat Cup Holder in our product range. It has a Knife Holder; Pliers Slot; Utility Tray for hooks and sinkers; and holes to hang hooks and lures.
The SeaSucker Fisherman's Cup Holder is a truly removable Boat Cup Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated 114 mm SeaSucker Vacuum Mount. A few pumps on the vacuum pump is all it takes to install the SeaSucker Fisherman's Cup Holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation or stubbie holder still wrapped around them. Alternatively swap out the cup holder insert for an optional Small Dry Box (a small waterproof storage box for your wallet, Smartphone, etc.). Made from 19 mm white starboard. Comes with a 114 mm Vacuum Mount packing 45 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Cup Holder Overall Length: | 360 mm |
Cup Holder Overall Width: | 155 mm |
Cup Holder Internal Diameter: | 89 mm |
Cup Holder Max. Depth: | 80 mm |
Cup Holder Min. Depth: | 57 mm |