SeaSucker
Small Bait Board Horizontal Mount
SeaSucker Small Bait Board Horizontal Mount This Bait Board is the smallest
Free Australia-Wide Shipping for orders over $200
This Bait Board is the most popular in SeaSucker's range; with a working surface of 559 mm wide by 305 mm deep. This Large Bait Board / Table has room for: filleting; bait preparation; or even serving up the catch of the day. Made of 13 mm white starboard, this table is a solid piece of kit and can dispose of baits overboard with ease.
It's powered by one 152 mm Vacuum Mount packing 90 kg of direct pull holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 152 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Bait Board. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included Protective Cover over the Vacuum Cup and you're done.
You can mount this table directly on top of your gunwale, bait tank or any other horizontal surface. Open corners let you easily dispose of unwanted baits overboard and knife slots provide convenient and safe knife storage. If you need to mount a Bait Board on a vertical surface please check the SeaSucker Large Board Vertical Mount.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 90 kg |
Load Carrying Capacity: | 31.75 kg |
Vacuum Mount Diameter: | 152 mm |
Vacuum Mount Height when mounted: | 46 mm |
Vacuum Mount Height at rest: | 56 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Bait Board Internal Width: | 559 mm |
Bait Board Internal Depth: | 305 mm |