SeaSucker
Large Dry Box - Horizontal Mount
SeaSucker Large Dry Box Horizontal Mount You'll never be short of waterproof st
Free Australia-Wide Shipping for orders over $200
You'll never be short of waterproof storage again no matter where you go. The Large Dry Box is big enough for your wallet, cell phone, camera, cigars, etc. It seals tight to keep water out. Two clips snap tight to keep the lid closed so you can stow it and be confident that whatever you put in it will stay dry. Plus, it’s a great size for taking to the beach or other sandy, muddy or wet environments.
Mounted on the side is a 114 mm SeaSucker Vacuum Mount with 45 kg of holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats, cars or around the home. A few pumps on the Vacuum Mount pump is all it takes to install the Large Dry Box. Lift the Vacuum Cup tab and it pops off. Mount this Large Dry Box on any vertical surface to keep your valuables secure.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the Seasucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Length: |
109 mm |
Width: | 89 mm |
Height: | 89 mm |