null
Lee's AL7211CR - 45 DEG Centre Rigger Holder

Lee’s Tackle

Lee's AL7211CR - 45 DEG Centre Rigger Holder

SKU:
AL7211CR
Condition:
New
Availability:
IN STOCK - Same business day shipping if order is placed before 3pm

Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder

The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder and Outrigger Specialist for over 50 years. 

Cast from marine grade anodized aluminium and finished in Bright Silver the Lee's Centre Rigger Holder has proven to be an effective tool when trolling. This centre rigger should be set at the highest position on the boat with the rigger line running straight down the middle setting the bait / lure farthest back in the trolling spread. The Centre Rigger has been proven to produce more strikes than the outriggers.

The Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder has an internal diameter of 35 mm (1-3/8") and is the ideal solution for 16 ft to 31 ft fishing boats. It has a small footprint of 76 mm (3") x 127 mm (5") and is our most popular centre rigger holder. The receiving tube is set at a 45 degree angle making it the perfect angle for mounting on T-Tops, Hard Tops, or Fly-Bridges.

The Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder is compatible with poles that are 12 ft to 14 ft in length with a diameter of 35 mm (1-3/8") 

WHAT'S IN THE BOX? 

1 x Lee's Tackle AL7211CR Fixed 45 DEG Angle Centre Rigger Holder 

Specifications 

Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder
Internal Diameter: 35 mm (1-3/8")
Footprint Length: 76 mm (3")
Footprint Width:  127 mm (5")
Boat length: 16 ft to 31 ft

 

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Total:
$0.00