null
Lee's Tackle 1 ¾ in. Flush Mount Skiff Holders (OH2016F)

Lee’s Tackle

Lee's OH2016F - 1 ¾ in. Flush Mount Skiff Holders

SKU:
OH2016F
Condition:
New
Availability:
IN STOCK - Same business day shipping if order is placed before 3pm
  • Lee's TX3717SL/S - 17 ft Telescopic Outrigger Poles - Bright Silver with Black Spikes
  • Lee's AP3716XS - 17 ft. Outrigger Poles Extra Strong Bright Silver Finish Mk II
  • Lee's RK0322RK - Single Rigging Kit for TWO Outriggers up to 25 ft (RK0322RK )

Lee's Tackle OH2016F - 1 ¾ in. Flush Mount Skiff Holder

The Lee's Tackle Flush Mount Skiff Holder is an ideal Gunnel Mount Outrigger Base. Its attractive, strong, and Bullet Proof with a one-piece flange construction. The Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability.

The tubes are made with Port and Starboard slot orientation to optimize fishing angle. The Flange mounts sit flush with gunnel. When the tube is removed the gunnel is unobstructed.

The Lee's Tackle Flush Mount Skiff Holder has three positions:

  1. Straight up Running;
  2. Angled out Trolling; and
  3. Straight back for Bridge Clearing.

Originally designed by Lee's Tackle in the 50's and copied by nearly every competitor. However, no one rivals Lee's Tackle for durability, fit & finish. Chrome on Brass construction.

WHAT'S IN THE BOX

2 x 1 ¾ in. Flush Mount Skiff Holders 

Specifications 
Lee's 1 ¾ in. Flush Mount Skiff Holders 
Base Plate Length: 149.4 mm
Base Plate Width: 89 mm
Base Plate Thickness at Edge: 7 mm
Base Plate Thickness at Centre: 10.4 mm
Tube Length: 180 mm
Tube Outside Diameter:  51 mm
Compatible Outrigger Lengths: 4.6 m (15 ft) to 5.2 m (17 ft) 

 

  

 

 

 

 
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Total:
£0.00