Free Australia-Wide Shipping for orders over $200
Black aluminium diamond-shaped plate used for mounting onto RAM’s phone holders and hand-held electronics mounts. Rubber coated ball; works with RAM “B”-Size Socket Arms (approx. 25 mm or 1″ diameter). The plate is made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments and has pre-drilled holes for screw mounting to the back of RAM phone mounts and GPS brackets.
The RAM B-Size Ball / Diamond Plate will attach to the housing of all SeaSucker Vacuum Mounts using a 1/4 - 20 grub screw. This provides a solid connection between the housing and the RAM B-Size Ball / Diamond Plate. You could go one step further and drill a small hole into the housing and insert a self-tapping screw as a locking pin.
If you intend on doing this please contact us as we have the required hardware. We can also fit the RAM B-Size Ball / Diamond Plate onto the housing at not cost.
1 x RAM B-Size 1 inch Ball / Diamond Plate
RAM Mounts
RAM 2.43" x 1.31" Diamond Base with 1.5" Ball The RAM-238U consists of a 1.5" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from cen
RAM Mounts
RAM Mounts 1" x 2" Rectangle Base with 1.5" Ball The RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes a
RAM Mounts
RAM B-Size 1 inch Ball / Plate The RAM-B-202U consists of a 1" B size rubber ball connected to a 2.5" diameter rou
RAM Mounts
RAM 1.5" Ball / Plate The RAM-202U consists of a 1.5" rubber ball that is connected to a 2.5" diameter round base. We use this product on the back of the RAM Tab-Tite Cradles to provide a se
RAM Mounts
RAM B-Size 1 inch Ball / Plate / Stud Constructed from black aluminium plate with a diameter of a
