Free Australia-Wide Shipping for orders over $200
SeaSucker Talon 2-PACK Deluxe Edition
This is the ULTIMATE SeaSucker Talon 2-PACK Deluxe Edition. The SeaSucker Talon 2-PACK Deluxe Edition includes EVERYTHING needed to transport 2 bikes on the outside of your car including a functional carry bag big enough to store the bike rack and accessories. The Talon 2-Pack Deluxe Edition is popular with cyclists who prefer the flexibility to install your bikes independently on the roof of your car. This is ideal for cars with corrugations or prominent sharp bends in the roof. This bike rack kit is also popular with cyclists that mostly transport one bike however they still want the option to transport a second bike when needed. And finally. The SeaSucker Talon 2-PACK Deluxe Edition would be the only 2 bike rack that is compact enough to fit onboard a plane in your carry onboard luggage. The SeaSucker Talon 2-PACK Deluxe Edition includes the following:
2 x SeaSucker Talons - The SeaSucker Talon kit includes everything you need to transport Quick-Release and a Through-Axle bike of your choosing
2 x SeaSucker Flight Decks - SeaSucker's Front Wheel Holder that integrates with the SeaSucker Talon Rear Wheel Strap.
2 x SeaSucker HUSKE Plugs - Select from QR 9 mm x 100 mm, TA 12 mm x 100 mm, TA 15 mm x 100 mm or TA 15 mm x 110 mm HUSKE Through-Axle Plugs
2 x SeaSucker Front Wheel Adapter - Available in 12 mm and 15 mm diameter this will be supplied in accordance with your HUSKE Plug selection. The SeaSucker Front Wheel Adapter is used with the Flight Deck, the SeaSucker Front Wheel Adapter converts a Through-Axle front wheel into a Quick-Release front wheel for easy transport.
Cleaning Kit - Aluminium Spray Bottle and Microfibre cloth to clean the mounting surface and the vacuum mount pads
2-Year Extended Warranty - Manufacturers warranty is 12 months. All SeaSucker bike racks sold by SeaSucker Down Under or our Authorized Resellers are covered with a 2-Year Warranty.
The SeaSucker Talon is our go anywhere single bike rack; use it on almost any car with ease. It’s small enough to be taken on board a plane as carry on board luggage. It's powerful enough to be used on interstate trips. That's ideal for cycling holidays when hiring a car at your destination.
The SeaSucker Talon can be installed in under two minutes and removed in seconds; no tools required. Its ultra-low profile minimizes wind noise and provides greater clearance under carports and garages. It fits easily inside the boot of your car when not in use.
The SeaSucker Talon is a single bike fork-mounted bike rack and uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. Secure your bike to the roof of your car without the hassle of a permanent bike rack. It can also be mounted on your boot, rear window or your SUV’s back glass.
SeaSucker vacuum mounts are:
Non-Marking.
UV and Weather Resistant.
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
Not suited on cars that have been Vinyl Wrapped
The 19 mm High-Density Polyethylene (HDPE) “L” shaped body conforms to your car’s roof-line. The SeaSucker Talon has three 152 mm SeaSucker vacuum mounts secured to the main board with marine-grade stainless steel hardware. Packing a combined direct pull strength of 360 kg the SeaSucker Talon has plenty of muscle and in-built redundancy.
Included in the kit is one Rear Wheel Strap (152 mm SeaSucker Vacuum Mount with molded housing and double-sided Velcro strap). It secures your bike’s rear wheel and keeps it from sliding left or right.
The SeaSucker Talon comes with one HUSKE Universal Fork Mount Base. The Quick-Release Plugs and Skewer are compatible with any bike that has "Drop Out" front forks. In other words, if you removed the front wheel of your bike expect to find a "Slot" at the bottom of each fork. If so, your bike has a Quick-Release or Drop Out Front Wheel.
Some minor assembly is required. The supplied tools are: Allen/hex Key; and a 7/16″ spanner.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!
The SeaSucker Talon Bike Rack 2-PACK Edition Kit includes
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
| Bicycle Capacity |
1 bicycle only, max. 20 kg |
| Bike Rack Type: | Fork Mounted (front wheel must be removed) |
| Vehcile Attachment Location: | Roof Top, Boot Lid or Hatchback |
| Vehicle Surface: | Steel, Aluminium, Glass, Fibreglass & Carbon Fibre |
| Vehicle Type: | Sedans, SUV's or Minivans |
| Fork Mount Type: | 1 x HUSKE Universal Fork Mount Base |
| Vacuum Mounts on Main Board: | Three 152 mm SeaSucker Vacuum Mounts |
| Number of Rear Wheel Straps: | One Rear Wheel Strap with Velcro |
| Main Board thickness (HDPE): | 19 mm |
| Required vehicle surface length: | (15 inches) - 381 mm (unobstructed) |
| Required vehicle surface width: | (13 inches) - 330 mm (unobstructed) |
| Weight: | 2.4 kg Approx. |
SeaSucker
SeaSucker Talon 2-PACK MAX Deluxe Edition This is the ULTIMATE SeaSucker Talon 2-PACK Deluxe Edition. The SeaSucker Talon 2-PACK MAX Deluxe Edition includes EVERYTHING needed to t
SeaSucker
SeaSucker Talon 1-Bike Rack 2-PACK Edition What's' better than one SeaSucker Talon 1-Bike Rack? A pair of them! The SeaSucker Talon 2-PACK Edition is the ultimate 2-Bike Rack with endless...
SeaSucker
SeaSucker Talon MAX Series - 2-PACK Edition What's' better than one SeaSucker Talon MAX Series Bike Rack? A pair of them! The SeaSucker Talon MAX Series 2-PACK Edition is the ultimate 2-Bike...
SeaSucker
What's new for the SeaSucker Talon - Deluxe Kit Introducing the SeaSucker Talon - Deluxe Kit, it's a SeaSucker Talon with the lot. Aimed at the cycling enthusiast that has a Quick-Release and/or a...
SeaSucker
What's new for the SeaSucker Talon - MAX Deluxe Kit Introducing the SeaSucker Talon - MAX Deluxe Kit, it's a SeaSucker Talon with the lot. Aimed at the cycling enthusiast that has a Quick-Release or...
