SeaSucker
Add-On Front Wheel Holder
SeaSucker Add-On Front Wheel Holder The SeaSucker Add-On Front Wheel Holder can be used with the SeaSucker Mini Bomber and Bomber Bike Racks. It's a
Free Australia-Wide Shipping for orders over $200
The 2021 SeaSucker Flight Deck includes the following:
The SeaSucker Flight Deck transforms your Rear Wheel Strap into a front-wheel carrying machine. It can be used with the SeaSucker Talon, Mini Bomber & Bomber Bike Racks and uses your existing Rear Wheel Strap as part of the package. Some minor assembly is required namely:
Within a few minutes your SeaSucker Flight Deck is ready for duty.
The front wheel mount features elongated vertical entry slots ensuring the front wheel can't fall out. This allows your front wheel to rest on the platform of the rack, providing additional stability when driving. Fasten the front wheel nuts for further security and you are ready to go.
The 6 mm aluminium front wheel mount can carry a wheel up to a 737 mm (29″) and sits on the black HDPE platform. The Flight Deck combined with your existing Rear Wheel Strap is powered by two 152 mm SeaSucker Vacuum Mounts. That's a combined 180 kg rating and beefed up redundancy to boot.
NOTE – The SeaSucker Flight Deck WILL work with 15 mm x 100 mm and 15 mm x 110 mm Through-Axle (TA) Front Wheels however you will need the SeaSucker Mountain Bike (MTB) Plug. This is available through our online store. The MTB Plug takes the place of the through axle bolt and converts a through axle front wheel into a quick release.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
The SeaSucker Flight Deck Kit includes
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating (each): | 90 kg |
Load Carrying Capacity (each): | 31.75 kg |
Vacuum Mount Diameter: | 152 mm |
Vacuum Mount Height when in use: | 46 mm |
Vacuum Mount Height at rest: | 56 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Required vehicle footprint length: | 355 mm |
Required vehicle footprint width: | 152 mm |
Thickness of Aluminium Front Wheel Holder: | 6 mm |
Front Wheel Holder Maximum Wheel Diameter: | 737 mm |