What's new for the 2021 SeaSucker Trike Rack
The 2021 SeaSucker Trike Rack includes the following:
-
2 Year Warranty - All SeaSucker Down Under sold Trike Racks come with a 2 year warranty.
-
Redesigned vacuum pumps with impregnated red indicator bands - This prevents fading of the indicator band.
-
Spare Vacuum Pump - Thank of it as a spare tyre in case you accidentally damage a vacuum mount.
-
Moulded rear wheel housing - It eliminates any sideways movement. Double-sided Velcro is used to secure the rear wheel.
-
Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
The SeaSucker Trike Rack
The SeaSucker Trike Rack is specially made for all you three-wheelers out there. Two platforms with wheel hooks plus a wheel strap for your single wheel holds your trike securely on your car’s roof. Like all SeaSucker racks, it attaches and removes in seconds and fits on virtually any car (except convertibles). Its ultra-low profile design minimises wind noise. It's compact enough to fit inside the boot of your car when not in use.
The SeaSucker Trike Rack uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. This allows you to securely mount your trike to the roof of your car without the hassle of a permanent rack.
SeaSucker vacuum mounts are:
-
Non-Marking.
-
UV and Weather Resistant.
-
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
-
Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
The SeaSucker Trike Rack uses five 152 mm SeaSucker vacuum mounts packing a direct pull strength of 450 kg to overcome aerodynamic forces. Included in the standard kit is one Wheel Strap (152 mm SeaSucker vacuum mounts with a hook-and-loop Velcro straps). The Wheel Strap secures your trike’s rear wheel.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
WHAT'S IN THE BOX?
The SeaSucker Trike Rack Kit includes
- Trike Platforms - 2 x SeaSucker Trike Platforms each with 2 x 152 mm Black Vacuum Mounts pre-installed.
- Rear Wheel Strap - 1 x 152 mm SeaSucker Black Vacuum Mount with Double-Sided Velcro straps pre-installed.
- Protective Covers - 5 x 152 mm SeaSucker White Vacuum Mount Protective Covers.
- Spare Tyre - 1 SeaSucker Black Vacuum Pump.
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
- Stainless Steel Hardware.
- Instruction Manual.
- 5 g Lube Tube for vacuum pump maintenance.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
152 mm Vacuum Mount Specifications | Maximum Pull Rating (each): | 90 kg |
| Load Carrying Capacity (each): | 31.75 kg |
| Vacuum Mount Diameter: | 152 mm |
| Vacuum Mount Height when in use: | 46 mm |
| Vacuum Mount Height at rest: | 56 mm |
| Housing Top Diameter: | 60 mm |
| Housing Height Only: | 33 mm |
| Housing Top Slot Width: | 7 mm |
| Housing Top Slot Length: | 14 mm |
| Housing Centre Thread: | ¼-20
|
We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
WHAT'S IN THE BOX?
The SeaSucker Trike Rack Kit includes
- Trike Platforms - 2 x SeaSucker Trike Platforms each with 2 x 152 mm Black Vacuum Mounts pre-installed.
- Rear Wheel Strap - 1 x 152 mm SeaSucker Black Vacuum Mount with Double-Sided Velcro straps pre-installed.
- Protective Covers - 5 x 152 mm SeaSucker White Vacuum Mount Protective Covers.
- Spare Tyre - 1 SeaSucker Black Vacuum Pump.
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
- Stainless Steel Hardware.
- Instruction Manual.
- 5 g Lube Tube for vacuum pump maintenance.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
152 mm Vacuum Mount Specifications | Maximum Pull Rating (each): | 90 kg |
| Load Carrying Capacity (each): | 31.75 kg |
| Vacuum Mount Diameter: | 152 mm |
| Vacuum Mount Height when in use: | 46 mm |
| Vacuum Mount Height at rest: | 56 mm |
| Housing Top Diameter: | 60 mm |
| Housing Height Only: | 33 mm |
| Housing Top Slot Width: | 7 mm |
| Housing Top Slot Length: | 14 mm |
| Housing Centre Thread: | ¼-20
|
Free Australia-Wide Shipping for orders over $200
